Ordinary Discount Off Grid Solar System Powerwall - W38M Explosive Disruptor – Topsky

1.Overview
W38M Explosive disruptor is mainly used for the disintegration of explosives or unknown packaging. It can meet the safety needs when the special police take counter-terrorism EOD tasks. The W38M can eliminate the risk and ensure the special police safety.

W38M Explosive disruptor can be used in the situation where there is unknown explosive . It is safe, reliable and strong destroy power.

2.Specification

Size：500mm*440mm*400mm Weight：21kg
Launcher length：500mm Launcher diameter: 38mm
Penetrate ability：wood 70mm；steel plate 3mm Bomb diameter：38mm
Vertical adjustment:0-30cm Horizontal adjustment:360°
Water Capacity : 300 ml Internal Pressure : ≥ 18,000 psi

Precautions
1)If electric fire bullet didn’t work properly, must wait 3mins to see it was really didn’t fire out, repeat step 5.
2)The exploder must be turn-off while connecting wires
3)Personnel must stay safely before the power turn-on.
4)Opened electric fire bullet cannot be reuse
5)It is normal phenomenon to appear beat or move a bit backwards upon the influence of shooting recoil
6)It’s better apply in open space to avoid harm to personnel or building. In particular cases, to disrupt at site, operation shall be carry behind reliable cover.
7)To be sure of safety, disruptor with bullet must not facing human.
Maintenance
1)Clean the firer and host upon normal use,shell must be push-off
2)Clean off any dust, oil spot or water marks if there is any
3)Check the firer parts to see if there is any damage, make sure the hitting needle is not bend
4)Clean the water cartridge, all holes must be clean
5)Check all wires and connect joints
6)Put the disruptor back into case after use and clean,locate it somewhere dry and ventilate to avoid moist and dust.
7)If the electric fire bullet open before use, shall keep in atmosphere of dry and ventilate,not allowed to leave it expose under strong light or humid air.
8)Please take good care of the product,avoid throw or knock down for its longevity.
Transport and storage
The storage warehouse much be kept clean, dry and ventilate. There must be equipment to prevent damage from lighting,fire, moist, insect and static. The temperature shall be between 15℃-25℃, humidity shall be less than 70%. Bullet shall piled in batch respectively, stable and with the frontage facing the service aisle. Load and transport safety requirements must follow the regulations from the transportation department, to guarantee the safety in loading and unloading.
Packing list