Fire fighting & rescue equipment

  • Fire Demolition Robot RXR-J150D

    Fire Demolition Robot RXR-J150D

    Overview It can replace people in toxic (polluted), collapsed, strong radiation and other special dangerous rescue places, and can also remotely control robots for building demolition, concrete drilling and cutting, tunnel excavation, emergency rescue, metallurgical furnace slagging and lining removal , The maintenance of the rotary kiln and the decommissioning of nuclear facilities to avoid casualties; Scope of application l Fire rescue for large petroleum and chemical companies l Tunnels, s...
  • All-terrain firefighting robot (four-track)

    All-terrain firefighting robot (four-track)

    Overview

    The all-terrain fire-fighting robot adopts a four-track all-terrain cross-country chassis, which has a strong balance of up and down stairs, stable climbing performance on steep slopes, suitable for ambient temperatures of -20°C to +40°C, four-track driving mode, hydraulic walking mode Motor drive, diesel engine, dual hydraulic oil pump, wireless remote control, equipped with electric remote control fire cannon or foam cannon, equipped with pan-tilt camera for on-site video capture, and auxiliary camera for observing road conditions when the robot is traveling, remote control can be controlled Engine start/stop, pan/tilt camera, vehicle driving, lighting, self-spray protection, automatic hose release, fire monitor, throttle and other function commands. It is used for target detection, offense and cover, fire fighting where personnel are not easily accessible, and rescue and rescue in dangerous situations.

    Fire-fighting robots can effectively replace trailer guns and mobile cannons, and use their own power to remotely control fire monitors or water mist fans to the required locations; effectively replace fire fighters near fire sources and dangerous places for reconnaissance, fire fighting, and smoke exhaust operations. Operators can carry out fire fighting operations up to 1,000 meters away from the fire source to avoid unnecessary casualties.

     

    Scope of application

    l The fire in the highway (railway) tunnel,

    l Subway station and tunnel fire,

    l Underground facilities and cargo yard fires,

    l Large-span and large-space workshop fires,

    l Fires in petrochemical oil depots and refineries,

    l Large areas of poisonous gas and smoke accidents and dangerous fires

     

    Feaures

    Four-track, four-wheel drive: Synchronous operation of one-sided crawlers can be realized, and the four-tracks can independently flip with the ground

    Reconnaissance system: Equipped with a PTZ camera for on-site video capture, and two auxiliary cameras for observing road conditions while the robot is traveling

    Fire monitor: equipped Water cannon for large flow water and foam liquid

    Climbing ability: Climbing or stairs 40°, roll stability angle 30°

    Water mist self-protection: automatic water mist protection system for body

    Technical parameters:

    1. Overall weight (kg): 2000
    2. Traction force of the whole machine (KN): 10
    3. Dimensions (mm): length 2300*width 1600*height 1650  (height of water cannon inclusive)
    4. Ground clearance (mm): 250
    5. Maximum flow rate of water monitor (L/s): 150 (automatically adjustable)
    6. Range of water cannon (m): ≥110
    7. Water pressure of water cannon: ≤9 kg
    8. Foam monitor flow rate (L/s): ≥150
    9. Swivel angle of water cannon: -170° to 170°
    10. Foam cannon shooting range (m): ≥100
    11. Water cannon pitch angle -30° to 90°
    12. Climbing ability: Climbing or stairs 40°, roll stability angle 30°
    13. Obstacle crossing height: 300mm
    14. Water mist self-protection: automatic water mist protection system for body
    15. Control form: car panel and wireless remote control, remote control distance 1000m
    16. Endurance: Can work continuously for 10 hours
  • RXR-C360D-2 Omnidirectional Robot 3.0

    RXR-C360D-2 Omnidirectional Robot 3.0

    RXR-C360D-2 Omnidirectional Robot 3.0 Product background: Investigations in dangerous, narrow, and low spaces have always been extremely important for anti-terrorism investigations and safety inspections. At present, anti-terrorism safety inspections also adopt centralized inspections by humans. This inspection method is time-consuming and labor-intensive. Unmanned robots can effectively complete the underside of the vehicle. The inspection work in complex areas such as houses and containe...
  • Hydraulic Power Unit 

    Hydraulic Power Unit 

    Model:BJQ63/0.6 Application: BJQ63/0.6 Hydraulic Power Unit is widely used in the area of traffic accident rescue, earthquake disaster relief and accident rescue. It is the power source of hydraulic forcible entry tool. Key Feature: Wide use High and low two stage pressure output, automatic conversion, then speed up the rescue time Can be used for a long time. It uses aviation hydraulic oil, so that it can work under temperature -30℃ to 55℃. It can simultaneously connect two sets of tools...
  • Hydraulic Combination tools

    Hydraulic Combination tools

    Model:GYJK-36.8~42.7/20-3 Application GYJK-36.8~42.7/20-3 Hydraulic Combi-Tool Cutter-Spreader is widely used in the area of traffic accident rescue, earthquake disaster relief, accident rescue and so on. It is suitable for mobile rescue operation. Cut off metal structure, vehicle components, pipe and metal sheet. Characteristic GYJK-36.8~42.7/20-3 Hydraulic Combi-Tool Cutter-Spreader incorporates shear, expansion and traction. This kind of tool is equivalent to a clipper and an expand...
  • Hydraulic Ram /Hydraulic support rod

    Hydraulic Ram /Hydraulic support rod

    Model:GYCD-130/750 Application: GYCD-130/750 Hydraulic support Rod is widely used in the field of highway and railway accident, air disaster and beach rescue, buildings and disaster relief. Key Features: Oil cylinder is made up of high strength lightweight alloy. Auxiliary equipment: mandril carriage It takes a little for legging, and then it speeds up the rescue process. The ends of the antiskid teeth are well elaborated, so it will not slip under stress. Two-way hydraulic lock combined wi...
  • Hydraulic Cutter

    Hydraulic Cutter

    Model: GYJQ-25/125 Brand: TOPSKY Application: GYJQ-25/125 is widely used in the rescue of highway and railway traffic accident, earthquake disasters, building collapsed, air disaster, marine perils and so on. Cutting Range: vehicle components, metal structure, pipeline, profiled bar, steel plates and so on. Characteristic: Blade is made of high quality heat treatment tool steel. Surface treated with anodizing. So it has good wearability. Moving parts are equipped with protective casing. The...
  • Hydraulic spreader

    Hydraulic spreader

    Model:GYKZ-38.7~59.7/600 Application: GYKZ-38.7~59.7/600 Hydraulic Spreader is widely used in the area of traffic accident rescue, earthquake disaster relief, accident rescue and so on. It is used for moving and lifting barrier, prying cracks and expanding an enterclose. It can deform the metal structure and torn the steel plate of the car surface. It cooperates with zipper and removes the obstacles in the roads. Characteristic: Expansion distance: 600mm It takes a little time while ope...
  • Manual pump  Model BS-63/0.07

    Manual pump Model BS-63/0.07

    Feature Supportive power source for single interface hydraulic tool series. No fuel or electricity is needed, manual operation can generate hydraulic power, and the perfect interior can freely switch between high and low pressure to improve rescue efficiency. 1. Single interface design, can operate under pressure, one step. 2, 360-degree rotating snap interface, more convenient and safer operation. Parameters Rated working pressure:   63MPa Hydraulic oil tank capacity: ≧2.0L Low Voltag...
  • Heavy hydraulic support ram  Model  GYCD-120/450-750

    Heavy hydraulic support ram Model  GYCD-120/450-750

    Feature The ram can be used for support, traction and other operations at the rescue site. In addition, the structure of the product has been optimized, and the support distance and stroke have been increased. Increased rescue space. 1. Double-tube single-interface design, which can be operated under pressure in one step. 2. The interface is a 360-degree rotating buckle, which is more convenient and safer to operate. 3. Non-slip switch control for more accurate operation. 4. It adopts two-way...
  • Heavy hydraulic cutter  Model GYJQ-28/125

    Heavy hydraulic cutter  Model GYJQ-28/125

    Feature The cutter can be used for operations such as cutting and separating at the rescue site. In addition, the edge material has been updated to enhance the edge gloss. Increased knife edge hardness, safer during use. 1. Double-tube single-interface design, which can be operated under pressure in one step. 2. The interface is a 360-degree rotating buckle, which is more convenient and safer to operate. 3. Non-slip switch control for more accurate operation 4. It adopts two-way hydraulic loc...
  • Heavy hydraulic cutter & spreader  Model: GYJK-25-40/28-10

    Heavy hydraulic cutter & spreader  Model: GYJK-25-40/28-10

    Feature The combination tool can be used for expansion, shearing, clamping, and other operations at the rescue site. In addition, the knife edge material has been updated to enhance the crush resistance and knife edge gloss. Increased knife edge hardness, safer during use. 1. Double-tube single-interface design, which can be operated under pressure in one step. 2. The interface is a 360-degree rotating buckle, which is more convenient and safer to operate. 3. Non-slip switch control for more ...
123456 Next > >> Page 1 / 6