Cheap PriceList for Luggage Door - YHZ9 Portable digital vibration meter – Topsky

Introduction:
The vibrometer is also called a vibrometer vibration analyzer or a vibrometer pen, which is designed by using the piezoelectric effect of quartz crystal and artificial polarized ceramic (PZT). It is widely used in machinery manufacturing, electric power, metallurgical vehicles and other fields.

To modernize equipment management, factories should actively promote advanced equipment management methods and adopt equipment maintenance technology based on equipment condition monitoring. Equipment condition monitoring and fault diagnosis technology is the prerequisite for preventive maintenance of equipment. Especially in heavy industry enterprises, which have strong work continuity and high safety and reliability requirements, they have passed condition monitoring.

Principle of vibration measurement in this section:
The vibrometer is also called a vibrometer vibration analyzer or a vibrometer pen, which is designed by using the piezoelectric effect of quartz crystal and artificial polarized ceramic (PZT). When quartz crystals or artificially polarized ceramics are subjected to mechanical stress, electrical charges are generated on the surface. The piezoelectric acceleration sensor is used to convert the vibration signal into an electrical signal. Through the processing and analysis of the input signal, the acceleration, velocity and displacement value of the vibration are displayed, and the corresponding measurement value can be printed out by a printer. The technical performance of this instrument conforms to the requirements of the international standard ISO2954 and the Chinese national standard GB/T13824, for the vibration intensity measuring instrument, the sine excitation method vibration standard. It is widely used in machinery manufacturing, electric power, metallurgical vehicles and other fields.

Developer: Kaiyuan Chuangjie (Beijing) Technology Co., Ltd.
Function: Mainly used for the measurement of three parameters of vibration displacement, speed (intensity) and acceleration of mechanical equipment

Technical Parameters:
Vibration probe piezoelectric acceleration probe (shear type)
Display range
Acceleration: 0.1 to 199.9m/s2, peak value (rms.*)
Speed: 0.1 to 199.0mm/s, rms
Position shift: 0.001 to 1.999mm p-p (rms*2)
Measuring range of speed and displacement, subject to acceleration value
199.9m/s2 limit.
Measurement accuracy (80Hz)
Acceleration: ±5%±2 words
Speed: ±5%±2 words
Bit shift: ±10%±2 words
Measuring frequency range
Acceleration: 10Hz to 1KHz (Lo)
1KHz to 15KHz (Hi)
Speed: 10Hz to 1KHz
Bit shift: 10Hz to 1KHz
Display: 3 digital display
Display update cycle 1 second
When the MEAS key is pressed, the measurement is updated, and when the key is released, the data is retained.
Signal output AC output 2V peak (display full scale)
Headphones (VP-37) can be connected
Load impedance above 10KΩ
Power supply 6F22 9V battery×1
When the current consumption is 9V, it is about 7mA
Battery life: about 25 hours of continuous operation (25℃, manganese battery)
Automatic power-off function After 1 minute without key operation, the power is automatically turned off.
Environmental conditions -10 to 50℃, 30 to 90%RH (non-condensing)
Size185(H)*68(W)*30(D)mm
Weight: about 250g (including battery)